⑤ Horizontal,
External Gear Pump
with Built-in Relief Valve
1. Environment Equipment / Material2. Water Treatment System3. Sludge Dewatering Machine4. Sludge Dryer5. Wastewater Treatment Chemical6. Water Treatment Chemical7. Water & Wastewater Analyzer8. Agitator & Pump① Agitator② Boiler Feed Water Pump③ Horizontal, single stage,
double suction volute casing centrifugal Pump④ Condensate Pump⑤ Horizontal,
External Gear Pump
with Built-in Relief Valve
⑥ Horizontal, Multi-Stage,
Turbine Pump⑦ Horizontal, Single Stage,
Volute Casing Self-Priming Centrifugal Pump⑧ Flow Pump⑨ Process Pump⑩ Turbine Pump⑪ Volute Pump⑫ Vortex Pump⑬ Screw Pump⑭ Gear Pump⑮ Chemical Pump⑯ Dosing Pump9.[ETC / Building Material]
Polyurethane Foam Spray
double suction volute casing centrifugal Pump④ Condensate Pump⑤ Horizontal,
External Gear Pump
with Built-in Relief Valve
⑥ Horizontal, Multi-Stage,
Turbine Pump⑦ Horizontal, Single Stage,
Volute Casing Self-Priming Centrifugal Pump⑧ Flow Pump⑨ Process Pump⑩ Turbine Pump⑪ Volute Pump⑫ Vortex Pump⑬ Screw Pump⑭ Gear Pump⑮ Chemical Pump⑯ Dosing Pump9.[ETC / Building Material]
Polyurethane Foam Spray
⑤ Horizontal,
External Gear Pump
with Built-in
Relief Valve
[200㎡/h ×~7kg/㎠]
External Gear Pump
with Built-in
Relief Valve
[200㎡/h ×~7kg/㎠]
♧ Usages and applications
01. Application
Lubrication oil, Fuel oil or other liquids with lubrication property.
02. Differential pressure
Up to 7kg/cm²
03. Bearing
Internally setted metal bearing, lubricated by the pumping liquid.
04. Shaft sealing
Gland packing or mechanical seal.
05. Relief valve
Built-in type, Setting pressure
: minimum 2.2kg/cm² maximum 7.2kg/cm²
06. Pumping temperature
Up to 70°C
07. Flanges
KS or JIS 10kg/cm², rating. FF.
08. Standard capacity
Calculated at 25.8cst. (Rw.No.1, 100sec.)
Rpm-slip of motor considered
* The out of the above range can be supplied
according to customer’s order placement
♧ Operating data
Capacity : 40m³/Hr ~ 200m³/Hr
Head : 3Kg/㎠ ~ 7Kg/㎠
Suction Bore : Ø150mm ~ Ø250mm