8. Agitator & Pump

♧ Usages and applications
In agriculture : water pumping and supply
In sewage system : water inflow and outflow
In general industries : water intake and supply


♧ Design and Construction features
01. Impeller : Propeller type
02. Outside Bearing :
Composite with Radial Bearing and Thrust Bearing
03. Sliding Bearing : Metal bearing by grease lubricating
04. Sealing Type : Gland packing type
05. Rotation : C.W when viewed from driver
06. Flange Rating : KS 5kg/cm² RF


♧ Operating data
01. Total Head : 2~6m
02. Discharge flow : 20~400m³/min
03. Temperature : 0~40°C
04. Bore : 350mm~1700mm

* The out of the above range can be supplied
according to customer’s order placement

up to 105℃ ~ 18kg/㎠ working pressure
[10~16 Bar / PN 10~16 Bar]


♧ Usages and applications
For clean water, sea water, crude oil, pulp water,
intermediate refinery products etc.

Services such as ballast, circulation, general service,
auxiliary water, drainage, supply etc.

In the water supply plants, refinery, pulp and paper industry,
irrigation, pipeline stations, tank installations, power plants etc.


♧ Design and operation features
01. Good efficiency, smooth operation, and trouble free operation
through a wide range of hydraulic coverage.

02. Flanges are KS or JIS 10kg/cm² ratings. FF

03. Dynamically and hydraulically balanced impeller.

04. Possible to fit with fan type impeller(option)

05. Generously size ball bearing are used.
Grease lubrication. (Standard) oil lubrication(option)

06. Bearing housings are flange mounted and doweled to the casing
to the casing to provide accurate realignment.

07. Short bearing span minimizes deflection

08. Uncooled stuffing box. Packing ring. Possible also mechanical seal.

09. Clock-wise(CW) rotation when viewed from the driver end.

10. Welded steel base plate. machined both up side and bottom side.


* The out of the above range can be supplied
according to customer’s order placement.


♧ Operating data
Capacity : 3m³/min ~ 450m³/min
Head : 8m ~ 190m
Suction bore : Ø200mm ~ Ø1,650mm

♧ Usages and applications
For clean fluids(water, sea water, oil etc)
For general purpose pumping in a wide range of services :
general industries, domestic water, buildings, water works,
water treatment, irrigation, marine use
(fresh water, cooling water, sanitary, G.S, ballast)


♧ Design and operation features
01. Good efficiency smooth operations and trouble free operation
throughout a wide range of hydraulic coverage.

02. Maximum interchange abilities of pump parts.
03. Flange are KS, JIS Suc. 5kg/cm²,
FF Dis. 5kg/cm², or 10kg/cm², FF

04. Dynamically balanced impeller
05. Clock-wise(CW) rotation when viewed form the driver end.
06. Impeller back pull-out arrangement
07. Available to install on a small space.
08. Easy to maintenance
09. Power transmission is preformed by a rigid coupling
10. Shaft sealing by M/Seal or Packing type.

* The out of the above range can be supplied
according to customer’s order placement.


♧ Operating data
Capacity : 1.2m³/min ~ 10m³/min
Head : 15m ~ 33m
Suction bore : Ø100mm ~ Ø250mm